Boiler Disposal

Guide · Homeowners · 3 min read · Updated 16 November 2026

How Much Does Boiler Disposal Cost in the UK?

Short answer

Boiler disposal in the UK costs from £40 to collect a disconnected wall-hung combi, system or regular boiler. Floor-standing or cast-iron boilers cost £60–£95, and back boiler and gas fire removal costs £120–£220 after decommissioning. A drained cylinder plus loft tanks costs £90–£180, radiators start from £10 each and an empty heating oil tank costs £200–£450 to remove.

How Much Does Boiler Disposal Cost in the UK?

Typical boiler disposal prices in 2026

Boiler disposal is priced on what is being collected, how heavy it is and where it is in the property. A modern wall-hung boiler that has already been taken off the wall and left in the garage is a quick job for one or two people. A cast-iron floor-standing boiler in a cellar, a back boiler behind a fireplace or a set of loft tanks above a narrow hatch takes much longer and needs more hands.

The prices in the table are for items that have already been made safe and disconnected. We give one fixed price before booking, based on your list of items, photos and the access.

ItemGuide priceNotes
Disconnected wall-hung boilerfrom £40Combi, system or regular, ground floor or garage
Floor-standing or cast-iron boiler£60–£95Two people and a trolley
Back boiler and gas fire£120–£220After decommissioning by a Gas Safe engineer
Hot water cylinder and loft tanks£90–£180Drained cylinder plus cold water and expansion tanks
Steel panel radiatorsfrom £10 eachBunged and carried out; cast iron priced separately
Empty heating oil tank£200–£450Residual oil must be pumped out first

What makes boiler disposal cheaper or dearer

A modern wall-hung boiler typically weighs somewhere between 25 and 45 kg, so it is light enough to carry without special kit. The price rises when items are heavy, awkward or high up. Old cast-iron boilers can be several times heavier than a modern combi. Cast-iron radiators are notoriously heavy for their size. Loft tanks have to come down through a hatch, sometimes after being cut into sections, and back boilers are wedged into a fireplace opening.

The other big factor is whether the items are ready to go. Anything still connected to gas, water or oil has to be made safe by the right engineer before we can touch it.

  • Items still connected to gas, oil or water
  • Heavy cast-iron boilers and radiators
  • Loft tanks above small hatches or with no boarding
  • Back boilers in tight fireplace openings
  • Possible asbestos in old flues, tanks or boiler panels
  • Residual oil or sludge in heating oil tanks

Does scrap value reduce the price?

Sometimes. Boilers, cylinders and radiators contain recyclable metals, particularly copper in older heat exchangers, cylinders and pipework, plus steel, cast iron and some brass and aluminium. Where scrap value applies, it is reflected in our prices, which is one reason boiler collections are cheaper than many other bulky items. A copper cylinder or a pile of copper pipe offcuts is worth more than a modern combi with a stainless or aluminium heat exchanger.

Scrap values move with metal prices, so we do not promise a fixed allowance. The quote you receive already takes the likely value into account.

Ways to keep the cost down

The cheapest approach is to have everything disconnected, drained and gathered in one accessible place before collection. If your heating engineer is replacing the boiler, ask them to leave the old one, the old flue and any redundant pipework in the garage or on the drive. Drain and bung radiators so they do not leak sludge on the way out.

Group items into one visit. Booking the boiler, cylinder, tanks and radiators from a full heating upgrade together costs considerably less than separate trips. Installers with regular volume can arrange trade collections from sites or yards on a set schedule.

Who should disconnect the boiler first

Disconnecting a gas boiler or back boiler is gas work under the Gas Safety (Installation and Use) Regulations 1998, and must be done by a Gas Safe registered engineer. Oil boilers should be isolated by an engineer competent in oil, commonly OFTEC registered. Electrical isolation of the boiler's supply and controls is normally done by the heating engineer at the same time.

We collect items once they are safe. We do not disconnect gas or oil appliances, but we can coordinate a qualified engineer if you need one.

What the price includes

Every collection includes carrying the items out of the property, loading and transport by a registered waste carrier, and delivery to a metal recycler or authorised facility. Any hazardous parts, such as suspected asbestos or oily residues, are handled separately through the correct routes. Businesses receive a waste transfer note for their records.

We arrange each job through vetted, insured local specialists, so the people collecting your boiler are properly registered and insured for the work.

Prices for installers and trade customers

Heating engineers, plumbers and builders often end up with a garage or yard full of old boilers, cylinders, radiators and copper offcuts. Leaving them on a customer's drive is not ideal, and running them to a council site is usually not allowed, because recycling centres are for household waste only. Trade collections solve that, either as a one-off clear-out or on a regular schedule from a yard or a run of sites.

Trade collections are priced on volume, weight and the mix of materials rather than per item, and the metal value is reflected in the price. Each collection comes with a waste transfer note, which businesses must keep for at least two years under the duty of care. Tell us roughly how many boilers, cylinders and radiators you have, where they are stored and how often you would like them collected.

Questions people also ask

Does my heating engineer take the old boiler away?

Many do, as part of a boiler replacement, but not all. Some leave the old boiler on site, and others charge to remove it. Check your quote. If the old boiler, cylinder and tanks are being left behind, a separate collection from £40 is usually the simplest way to clear them.

Is an old boiler worth money as scrap?

Usually a little, but not much. Older boilers with copper heat exchangers, copper cylinders and brass fittings have the most value. Modern combis with aluminium or stainless heat exchangers are worth less. Scrap value is reflected in our prices, which helps keep collection costs low.

Can you collect old radiators on their own?

Yes. Steel panel radiators start from £10 each when collected with other items, and they should be drained and bunged to avoid sludge leaks. Cast-iron radiators are much heavier and priced separately, depending on their size and how many flights of stairs are involved.

Written and checked by the Boiler Disposal team. Read our editorial policy.

Get a free boiler disposal quote

Tell us what you need and we'll come back with a clear price.

Request a quote