Boiler Disposal

Boiler Disposal

Radiator and Pipework Disposal

Collection of old steel and cast-iron radiators, towel rails and offcut copper pipe from refurbishments, with careful handling to avoid sludge spills.

Free Boiler Disposal quote

No obligation. We only use your details to reply about this job.

Radiator and Pipework Disposal — Boiler Disposal

What's involved

Old radiators are surprisingly messy. Even after draining, steel panel radiators hold black magnetite sludge that pours out when tipped, so we cap or bung the valves, bag the ends and carry them flat. A standard double panel radiator weighs 15–35 kg, but old cast-iron column radiators are far heavier, often 60–120 kg or more for a large one, and need two people and a trolley. Some cast-iron radiators in good condition have resale value to reclamation yards; we will tell you if yours look worth selling. Copper pipe offcuts, brass valves and fittings are collected in bags. We take radiators from anywhere in the house, including upstairs, and protect walls and stairs on the way out. Everything is weighed in at a metal recycler. Allow around five minutes per steel radiator and longer for cast iron, depending on the route out.

How we handle it

  1. Describe the items

    Use the quote form to list what needs collecting: boiler type, cylinder, tanks, radiators or oil tank. Tell us where each item is, whether it has been disconnected and drained, and add photos if possible.

  2. Get your fixed price

    We confirm one all-in price based on the items, weight and access. If anything may contain asbestos or residual oil, we explain what extra steps are needed before collection.

  3. Disconnection by an engineer

    A Gas Safe registered engineer or OFTEC technician disconnects and makes safe the boiler, and the system is drained. Leave items somewhere dry and accessible if they have already been removed.

  4. Collection

    Our team protects floors and walls, bungs radiator valves to prevent sludge leaks, and carries items out. Loft tanks and back boilers take longer and are planned in advance.

  5. Recycling and paperwork

    Metals are taken to a recycler and any hazardous waste goes to a licensed facility. You receive a waste transfer note confirming the items were handled by a registered waste carrier.

Price guide

Boiler disposal is priced on the number and type of items, their weight and how hard they are to reach. A single disconnected wall-hung boiler in a garage is a quick, low-cost job. Back boilers, loft tanks, cast-iron radiators and oil tanks take longer. Metal scrap value is reflected in our prices where it applies.

  • Back boiler and gas fire removal: £120–£220. After decommissioning; includes lifting out the cast-iron unit and clearing debris.
  • Floor-standing or cast-iron boiler: £60–£95. Heavier units needing two people and a trolley, depending on route and weight.
  • Disconnected wall-hung boiler: from £40. Combi, system or regular boiler collected from the ground floor, garage or drive.

Questions about radiator and pipework disposal

How much does boiler disposal cost?

Collecting a disconnected wall-hung boiler typically costs from around £40. Heavier floor-standing boilers cost more, and a back boiler removal is usually £120–£220. Clearing a cylinder and loft tanks typically costs £90–£180. The final price depends on the number of items, their weight and how easy they are to reach.

Get a free boiler disposal quote

Tell us what you need and we'll come back with a clear price.

Request a quote