Boiler Disposal
Hot Water Cylinder and Tank Removal
Drained copper cylinders removed from airing cupboards and cold water storage tanks taken out of lofts, including awkward loft hatch access.

What's involved
When a regular or system boiler is replaced with a combi, the copper hot water cylinder in the airing cupboard and the cold water storage tank and feed-and-expansion tank in the loft become redundant. Once your heating engineer has drained and capped them, we remove them. Copper cylinders weigh 15–30 kg empty but can still hold several litres in the bottom, so we tip them carefully into a container. Loft tanks are the awkward part. Plastic tanks can often be flexed or cut to fit through the loft hatch, while older galvanised steel tanks were sometimes installed before the roof was finished and may need cutting into sections. Some very old tanks are made of asbestos cement and must not be cut or broken until tested. We bring boards to stand on in the loft and dust sheets for the landing. Removal of a cylinder and two tanks usually takes one to two hours.
How we handle it
Describe the items
Use the quote form to list what needs collecting: boiler type, cylinder, tanks, radiators or oil tank. Tell us where each item is, whether it has been disconnected and drained, and add photos if possible.
Get your fixed price
We confirm one all-in price based on the items, weight and access. If anything may contain asbestos or residual oil, we explain what extra steps are needed before collection.
Disconnection by an engineer
A Gas Safe registered engineer or OFTEC technician disconnects and makes safe the boiler, and the system is drained. Leave items somewhere dry and accessible if they have already been removed.
Collection
Our team protects floors and walls, bungs radiator valves to prevent sludge leaks, and carries items out. Loft tanks and back boilers take longer and are planned in advance.
Recycling and paperwork
Metals are taken to a recycler and any hazardous waste goes to a licensed facility. You receive a waste transfer note confirming the items were handled by a registered waste carrier.
Price guide
Boiler disposal is priced on the number and type of items, their weight and how hard they are to reach. A single disconnected wall-hung boiler in a garage is a quick, low-cost job. Back boilers, loft tanks, cast-iron radiators and oil tanks take longer. Metal scrap value is reflected in our prices where it applies.
- Disconnected wall-hung boiler: from £40. Combi, system or regular boiler collected from the ground floor, garage or drive.
- Floor-standing or cast-iron boiler: £60–£95. Heavier units needing two people and a trolley, depending on route and weight.
- Back boiler and gas fire removal: £120–£220. After decommissioning; includes lifting out the cast-iron unit and clearing debris.
Questions about hot water cylinder and tank removal
What do I do with an old hot water cylinder?
Once your heating engineer has drained and capped it, a copper cylinder can be collected for recycling, and copper has a good scrap value. Avoid tipping it indoors, as dirty water often remains at the bottom. If the cylinder has foam insulation, it is still recycled as metal once the foam is stripped at the processing site.
How do you get an old water tank out of the loft?
Plastic tanks can usually be flexed, folded or cut to fit through the loft hatch. Galvanised steel tanks may need cutting into sections, because some were placed in the loft before the roof was finished. Older tanks that may be asbestos cement must not be cut until tested. We bring boards and dust sheets to protect ceilings and landings.
Other services
Old Boiler Collection
Collection of wall-hung combi, system and regular boilers that have already been disconnected, from homes, building sites and installers' yards.
Back Boiler Removal
Removal of old back boilers and their gas fires from fireplaces after decommissioning, including the heavy cast-iron boiler unit and fire front.
Radiator and Pipework Disposal
Collection of old steel and cast-iron radiators, towel rails and offcut copper pipe from refurbishments, with careful handling to avoid sludge spills.
Oil Boiler and Oil Tank Removal
Removal of oil-fired boilers and empty plastic or steel heating oil tanks from rural and off-grid properties, with residual oil handled by licensed specialists.
Installer and Trade Collections
Regular or one-off collections of old boilers, cylinders and scrap from heating engineers, plumbers and builders, from sites or yards.
Hot Water Cylinder and Tank Removal near you
Get a free boiler disposal quote
Tell us what you need and we'll come back with a clear price.
Request a quote