Boiler Disposal

Boiler Disposal FAQs

Straight answers to the questions we're asked most.

How do I dispose of an old boiler?

Most people ask their heating engineer to take it, book a registered waste carrier, or take it to a household recycling centre that accepts scrap metal. The boiler must be disconnected by a Gas Safe registered engineer or OFTEC technician first. A collection service is useful if the installer has left the boiler behind or there are also tanks and radiators to clear.

Does the boiler installer take the old boiler away?

Many installers include removal of the old boiler in their quote, but not all do, and some leave cylinders, loft tanks and radiators behind. Check your quote before work starts. If items are left, a separate collection is usually cheaper than paying for a skip, and you get a waste transfer note.

How much does boiler disposal cost?

Collecting a disconnected wall-hung boiler typically costs from around £40. Heavier floor-standing boilers cost more, and a back boiler removal is usually £120–£220. Clearing a cylinder and loft tanks typically costs £90–£180. The final price depends on the number of items, their weight and how easy they are to reach.

Is an old boiler worth anything as scrap?

A little. Boilers contain copper, brass and steel, and scrap yards pay by weight, but a typical modern combi only yields a few pounds once plastic and electronics are removed. Copper cylinders and old cast-iron radiators are worth more. For most people the value is not enough to justify the trip, which is why collection prices allow for it.

Can old boilers contain asbestos?

Some older boilers and their surroundings can contain asbestos, for example in flue pipes, gaskets, insulation panels or the cupboard lining. Very old cold water tanks may also be asbestos cement. If the installation is several decades old or its history is unknown, have suspect materials tested by a qualified surveyor before anyone disturbs them.

Can I remove my own boiler?

You must not disconnect a gas boiler yourself. It is gas work that legally requires a Gas Safe registered engineer. Oil boilers should be disconnected by an OFTEC-registered technician. Once the boiler is disconnected and the system drained, anyone can carry it out, but it is heavy and full of sludge, so care is needed.

What do I do with an old hot water cylinder?

Once your heating engineer has drained and capped it, a copper cylinder can be collected for recycling, and copper has a good scrap value. Avoid tipping it indoors, as dirty water often remains at the bottom. If the cylinder has foam insulation, it is still recycled as metal once the foam is stripped at the processing site.

How do you get an old water tank out of the loft?

Plastic tanks can usually be flexed, folded or cut to fit through the loft hatch. Galvanised steel tanks may need cutting into sections, because some were placed in the loft before the roof was finished. Older tanks that may be asbestos cement must not be cut until tested. We bring boards and dust sheets to protect ceilings and landings.

Can you remove a back boiler and gas fire?

Yes, once a Gas Safe registered engineer has disconnected the gas and a heating engineer has drained the system and capped the pipes. We remove the fire front and lift out the cast-iron back boiler, then sweep up soot and debris. The fireplace opening is left clear for your builder to make good or fit a new fire.

Do you collect boilers from heating engineers?

Yes. We collect old boilers, cylinders and scrap directly from customers' homes after an installation, or from engineers' yards on a regular basis. For larger projects, such as boiler replacement programmes for landlords, we can arrange repeat collections and provide consolidated paperwork for the project.

What happens to my old boiler after collection?

It goes to a metal recycler, where the copper heat exchanger, brass fittings, steel casing and aluminium parts are separated and sent for smelting. Plastics and electronics are removed and processed separately. Any hazardous items, such as asbestos or oily waste, go to licensed facilities with the correct paperwork.

How do I get rid of an old oil tank?

First, have any remaining oil and sludge pumped out by a licensed oil waste contractor, because it is hazardous waste. Once empty, the tank can be cut up or lifted onto a vehicle and recycled. Plastic and steel tanks are both recyclable. Tell us the tank size and material when you request a quote.

Get a free boiler disposal quote

Tell us what you need and we'll come back with a clear price.

Request a quote