Derbyshire · East Midlands
Boiler Disposal in Long Eaton
Homeowners and heating engineers in Long Eaton and nearby Ilkeston use us to clear old boilers without a trip to the tip.
Clear old tanks and cylinders in Long Eaton. Get a quote now.
Our Long Eaton coverage
Long Eaton falls within Derbyshire, East Midlands. Postcodes we cover here include NG10 and DE72. We also take jobs in Sandiacre, Borrowash, Breaston, Kegworth and Erewash.
Local considerations in Long Eaton
Spare radiators replaced during a Long Eaton extension can be collected along with the old boiler. We can collect from your Long Eaton driveway on the same day your heating engineer finishes the new installation.
The East Midlands has a large stock of red-brick terraces and inter-war semis in its cities, with plenty of villages and new estates in between. Older Long Eaton homes often have back boilers behind gas fires, which are heavy cast iron and need careful lifting.
Boiler Disposal jobs we handle in Long Eaton
Hot Water Cylinder and Tank Removal
Drained copper cylinders removed from airing cupboards and cold water storage tanks taken out of lofts, including awkward loft hatch access.
Radiator and Pipework Disposal
Collection of old steel and cast-iron radiators, towel rails and offcut copper pipe from refurbishments, with careful handling to avoid sludge spills.
Oil Boiler and Oil Tank Removal
Removal of oil-fired boilers and empty plastic or steel heating oil tanks from rural and off-grid properties, with residual oil handled by licensed specialists.
Installer and Trade Collections
Regular or one-off collections of old boilers, cylinders and scrap from heating engineers, plumbers and builders, from sites or yards.
Old Boiler Collection
Collection of wall-hung combi, system and regular boilers that have already been disconnected, from homes, building sites and installers' yards.
Back Boiler Removal
Removal of old back boilers and their gas fires from fireplaces after decommissioning, including the heavy cast-iron boiler unit and fire front.
How much it costs in Long Eaton
- Disconnected wall-hung boiler: from £40. Combi, system or regular boiler collected from the ground floor, garage or drive.
- Empty heating oil tank removal: £200–£450. Depends on size, material and access; residual oil must be pumped out first.
- Old radiators: from £10 each. Steel panel radiators bunged and carried out; cast-iron radiators priced separately.
Prices are a guide. Your quote for Long Eaton is a fixed price based on the details you give us. Full price guide.
Boiler Disposal questions from Long Eaton
Does the council take old boilers in Long Eaton?
Household recycling centres in Derbyshire usually accept scrap metal, so you can take a boiler there yourself. If you cannot lift or transport it, our Long Eaton collection service is easier.
Do you collect from heating engineers in Long Eaton?
Yes. We collect old boilers directly from customer properties after installs in Long Eaton, or from your yard, so you can finish jobs on time and keep your van clear.
Can you remove an oil tank in Long Eaton?
Yes. We remove empty plastic and steel oil tanks around Long Eaton and Ilkeston. Any remaining oil or sludge must be pumped out by a licensed contractor first, which we can help arrange.
Do you cover Ilkeston and West Bridgford as well as Long Eaton?
Yes. Our boiler disposal service covers Long Eaton and nearby areas including Ilkeston and West Bridgford, along with rural properties across Derbyshire.
How do you get an old water tank out of the loft?
Plastic tanks can usually be flexed, folded or cut to fit through the loft hatch. Galvanised steel tanks may need cutting into sections, because some were placed in the loft before the roof was finished. Older tanks that may be asbestos cement must not be cut until tested. We bring boards and dust sheets to protect ceilings and landings.
How do I dispose of an old boiler?
Most people ask their heating engineer to take it, book a registered waste carrier, or take it to a household recycling centre that accepts scrap metal. The boiler must be disconnected by a Gas Safe registered engineer or OFTEC technician first. A collection service is useful if the installer has left the boiler behind or there are also tanks and radiators to clear.
Helpful guides
Switching From a Gas Boiler to a Heat Pump: Removing the Old System
When you switch from a gas boiler to a heat pump, the old boiler is disconnected by a Gas Safe registered engineer and removed. A combi…
Read the guide →Hot Water Cylinder and Loft Tank Removal: A Practical Guide
Hot water cylinder and loft tank removal usually follows a switch to a combi boiler. A plumber drains and disconnects the cylinder and…
Read the guide →Get a free boiler disposal quote in Long Eaton
Tell us what you need and we'll come back with a clear price.
Request a quote