Barnet · London
Boiler Disposal in Barnet
Switching to a combi in Barnet? We take out the redundant cylinder and loft tanks once your engineer has drained them.
Legal, fixed-price boiler recycling across Barnet. Get started.
Where we work around Barnet
Barnet is in the Barnet council area in London. Postcodes we cover here include EN5, EN4, N20, N11, NW7 and HA8. Nearby places we also cover include Finchley, Potters Bar, Edgware, Friern Barnet and Enfield.
Boiler Disposal in Barnet: local know-how
Spare radiators replaced during a Barnet extension can be collected along with the old boiler. We can collect from your Barnet driveway on the same day your heating engineer finishes the new installation.
Work in London is shaped by access: controlled parking zones, red routes, narrow residential streets and the Congestion and ULEZ charges all affect how a job is planned. Pre-war Barnet properties may have galvanised or very old cold water tanks in the loft, which we check before cutting.
What we can do in Barnet
Oil Boiler and Oil Tank Removal
Removal of oil-fired boilers and empty plastic or steel heating oil tanks from rural and off-grid properties, with residual oil handled by licensed specialists.
Radiator and Pipework Disposal
Collection of old steel and cast-iron radiators, towel rails and offcut copper pipe from refurbishments, with careful handling to avoid sludge spills.
Hot Water Cylinder and Tank Removal
Drained copper cylinders removed from airing cupboards and cold water storage tanks taken out of lofts, including awkward loft hatch access.
Back Boiler Removal
Removal of old back boilers and their gas fires from fireplaces after decommissioning, including the heavy cast-iron boiler unit and fire front.
Old Boiler Collection
Collection of wall-hung combi, system and regular boilers that have already been disconnected, from homes, building sites and installers' yards.
Installer and Trade Collections
Regular or one-off collections of old boilers, cylinders and scrap from heating engineers, plumbers and builders, from sites or yards.
Typical costs in Barnet
- Disconnected wall-hung boiler: from £40. Combi, system or regular boiler collected from the ground floor, garage or drive.
- Empty heating oil tank removal: £200–£450. Depends on size, material and access; residual oil must be pumped out first.
- Old radiators: from £10 each. Steel panel radiators bunged and carried out; cast-iron radiators priced separately.
Prices are a guide. Your quote for Barnet is a fixed price based on the details you give us. Full price guide.
Boiler Disposal questions from Barnet
Do you collect from heating engineers in Barnet?
Yes. We collect old boilers directly from customer properties after installs in Barnet, or from your yard, so you can finish jobs on time and keep your van clear.
Does the council take old boilers in Barnet?
Household recycling centres in Barnet usually accept scrap metal, so you can take a boiler there yourself. If you cannot lift or transport it, our Barnet collection service is easier.
Do you remove back boilers in Barnet?
Yes. Once a Gas Safe engineer has disconnected it and the system is drained, we remove back boilers and gas fires from Barnet homes and clear the fireplace opening.
Can you remove loft tanks in Barnet?
Yes, once they are drained and capped. We remove cold water and expansion tanks from lofts in Barnet, cutting plastic or steel tanks where needed. Possible asbestos cement tanks are tested first.
Does the boiler installer take the old boiler away?
Many installers include removal of the old boiler in their quote, but not all do, and some leave cylinders, loft tanks and radiators behind. Check your quote before work starts. If items are left, a separate collection is usually cheaper than paying for a skip, and you get a waste transfer note.
What do I do with an old hot water cylinder?
Once your heating engineer has drained and capped it, a copper cylinder can be collected for recycling, and copper has a good scrap value. Avoid tipping it indoors, as dirty water often remains at the bottom. If the cylinder has foam insulation, it is still recycled as metal once the foam is stripped at the processing site.
Helpful guides
Switching From a Gas Boiler to a Heat Pump: Removing the Old System
When you switch from a gas boiler to a heat pump, the old boiler is disconnected by a Gas Safe registered engineer and removed. A combi…
Read the guide →Back Boiler Removal: What Is Involved and What It Costs
Back boiler removal starts with a Gas Safe registered engineer decommissioning the boiler and gas fire, draining the heating system and…
Read the guide →Get a free boiler disposal quote in Barnet
Tell us what you need and we'll come back with a clear price.
Request a quote